Blog

  • Import Porsche Boxster from abroad?

    Hey Autofans Bin 28 and plan to buy a Porsche Boxster, but do not want to spend more than 20k maximum 25k. Cars should not be older than year of construction 2004 and also not have all too many kilometers on it. So far my cars have always been quite normal at ebay or on the car market, but I have now come to the conclusion that it might be cheaper to import one from abroad but no plan what there insurance technical and cost-technical still comes on one What could you recommend to me? For example, I have seen a standard boxster on the English Porsche website already aB 32k pounds (maximum 34k Euro), in Germany only from 45k Euro of which I think it is also a much cheaper one to get from England, but of course there is also the problem with right-hand handlebars…. I actually don’t have a plan and wanted to ask if you can recommend me something as cheaply as I can easily and safely to a B oxster could come and whether it is worth buying it maybe not in Germany. (live in the vicinity of Cologne). merci and greetings

  • Company cars or private cars??

    Hello community, I have a question about company cars. For years I have been driving a company car, which is taxed according to the 1% method plus 0.03% per KM to the place of employment. It is still to be counted here an own participation to the equipment. Example: BLP of the car: 40.000€. 1% of it is 400€. I have a monthly own participation of 150€, i.e. I tax 250€. In addition 50 kilometers to the place of employment, i.e. 50*0.03%*40.000=600€. So I get on my gross salary total 850€ above At about 40% deductions, this means that the car costs approx. 850€*40%+150€=490€ per month. Now the company offers a unique opportunity to buy a car privately, to dispense with the company car and then to get 0.3€ per km, which you drive on duty. At about 30,000 km, which I drive on duty in the year, this means that I get 900€ per year, that is 750€ per month. My questions: – If I lease a car privately, you can also arrange a full lease, i.e. all the costs, including gasoline? – What does that cost? – Are there good internet sites here where you can calculate the costs? – Can you also get money from the tax office if you swirl on private leasing? – Does my calculation at all so, or do I have something to consider? – How do I get money from the tax office? Does buying a private car look like it? Greetings, Andreas

  • Online shop, low shipping costs

    Who knows a good online shop, e.g. for Meguiars products? Especially a company that has no or low shipping costs, even for small orders !!! Most demand up to 10,- Euro, with a low product value makes no sense. The classic dealers at my site usually have no choice – unfortunately. Thanks for tips! Greeting Bruce

  • 1 day after polishing scratcher ???

    HI I have with my Audi A4 B5 laser red after a day polish scratcher on the car????? I don’t understand where I polished it with Sonax everything was top! neither on the trunk nor scratcher as on the door! then it rained in the evening… now come always and more scratcher to appear????? I don’t know why;______________; now my question, can it be made visible by the polished old scratcher….so that through the rain then everything went off? would answer me over very happy……. only I didn’t see them all before!!! the go crooked and crosswise and then…….as if you were to push a nail in so round scratcher…. and just finger long… very funny…… achso give me a pen at a.t.u where you can paint over with the scratcher? have seen such a thing in tv… would be very happy to answer….

  • super sportsman wanted

    Hey people Drive now for 4 years a GSX750F Now I want to finally get a sporty machine!The following bikes would be available to choose from: -Honda CBR900 SC44 -Kawasaki Zx9r 900E – yzf R1 – GSXR1000 K1 Bike should be neatly maintained less than 25 tkm best 1 hand and max 3800- 4000 € cost around the construction years 2000-2002 are lying Which would you recommend and why? Strengths/weak the models Ride most of the country road, but also wants to be able to “break the tap” properly…. no race track! Look forward to your answers and tips Thank you

  • Which vehicle would you choose at the following starting position…

    Weche’s car would be your choice if you had the following starting position: (brand doesn’t matter for now) – 45000km a year – low consumption (LPG / Diesel) – repair and maintenance costs cheap – very reliable (mackless) – comfortable seats – no small car – 3 water boxes should be to be transported in the trunk – pleasantly soft chassis – performance should be so high that trucks should not pose a problem – budget up to 1000€ – KM power not greater than 100,000€ – no significant negative experience regarding the engine. thank you already

  • Unround motor run

    Since a few days my Alero spins at the cold start. It starts immediately when starting, but then the engine doesn’t run on all cylinders. The whole thing goes like this for about a minute, then it hits itself again and everything is ok. Unfortunately I notice that in the balance tank again small oil traces appear and I assume that the seals of the intake manifold are over again, that was at about 65,000 km already once. I had then “heavy-duty” metal seals from the USA built in and believed me on the safe side. That was five years ago. Will once again order me a sealing set in the USA, maybe the seals have become a little better.

  • S10 Blazer, wheel bearing or joint shaft, who’s loud here?

    Somehow I have a difficult to localize problem with my “small”. Noise, grim kind with vibrations up to the bottom plate of the driver from approx. 75 kmh to 120 kmh. Easy play in the wheel bearing left, not reusable since complete wheel stroke. In curves (BAB up and downs) the noise occurs only in left turns, so when the left wheel is relieved. When starting with fully beaten wheels, 4WD off, even at the left side long. With 4WD there is a very clear K Nack, but also only left long. Bumped up, relieved and turned by hand the front wheels can not provoke the noise. Tires on the left side of the inner shoulder have run out a bit more than normal. And now? Wheel bearing, receptive wheel stroke or drive shaft??

  • Maximum speed change due to other pinion

    Hello, at school I paid little attention, therefore this question. At the front I have a 15 sprocket on my moped, I exchange this for a 16s, then it gets faster or slower ? Presumably slower, because direction big sprocket is 1:1 greetings

  • dyna shakes

    Hello I’ve been driving for 3 years ne dyna superglide custom from 2009 as cheap English and since then about 10000 km. Actually I find the style quite good …but I like to drive a little bit more and have therefore grown an original Harley windshield … it has quickly noticed that the moped from about 140 becomes quite unstable. at the last inspection I have therefore tried other matures ..metzler … which made the thing even worse … and today I have mi This is why you almost put on the snatch … have needed the whole track to capture the part … at 140 … thought ..now you die .. I don’t have a BOCK MORE .. THE week the part comes to the dealer … either he gets it, or I buy a road king again … or .. even better ne BMW .. has someone similar probs …or even better ..ne SOLUTION?? lg klaus