When I was on the left lane at over 200 km/h, a motorcycle overtook me on the left side. It was at least 10 cm away from me. Just a little distracted and the motorcyclist would have mown it. Now I would be interested in what the STVO would say if it had actually disassembled him. Who is to blame then?
Blog
-
Moose logo
Hello, I’m looking for a beautiful elk logo that I want to integrate into our new user map. I haven’t really found yet. The only logo that I found was the website alter-swede.de (see picture). I want to insert the logo into the map at the top left so that we can identify more with the moose 😉 Somewhere in the thousands of postings I’ve already read that various logos have already been created. urden. Who knows more? Who can help? Who might provide us with a logo? BoisBleu
-
The eternal theme of windshield wipers
Hello everybody, I’m not sure if it really affects as many people as is always said. With my car it’s basically that the windows are dirty or smeared exactly in my field of view. This morning again. The windshield is bare and absolutely clean. But at some point on the ride comes a bit too much dirt on the disc. You think “don’t wipe” yourself. But after Murphy gets even more dirt on the disc, so that you eventually get to the Wisc The wipers are already on the move. …wipe…ready… while you’re despiriting the wiping success or trying to see through it dawns on you. Hadn’t I… Had I already noticed, then everything gets clean, except the piece of disk exactly in my field of view? No? Yes. The whole disc is clean – except for the spot I look forward. How do I do that? I’ve been following this for years now. At the moment I have normal Bosch leaves on it, with the left wiper additionally having a spoiler. Tomorrow I’ll get a new windshield (rock sequence with crack) and I’ll also buy the car new wipers. If I prefer to use spoiler-free wipers this time or rather take the full blower Bosch Twin with power glider – or was that something else now 😉 What does it mean? Do you have any tips on the subject? What are your experiences? Greetings BoisBleu
-
Wrong location in Mercedes Me App
Yesterday I was travelling in a big city and then drove home 30km. The EQE was parked in the garage where it is still standing. In the Mercedes Me app the current location of the vehicle is still displayed in the big city where I had parked yesterday. Does someone know what this may be, why the current location in the Me is displayed incorrectly.
-
H&R sports springs…….Experiences ?
Hello everyone ! I intend to install a set of sports springs from H&R on my modest vehicle (Seat Léon Cupra 4 V6), at the same time with a wheel set 18 inches with the 1000miglia rims model “EVO 5”. Now I read in my forum that such springs are frowned on, at least in part. Some talk about a worse driving behaviour at higher speeds. I asked extra about 2 colleagues who have both springs in it, a Subaru Impreza GT and also a Leon Cupra. Both are completely z It is absolutely clear to me that a complete chassis is always better, but why should I throw out a good series suspension like that of the Cupra (S3 is certainly just as good) and give away too much money, I just want the box a little deeper, but not so that it is lying on the wheels, only about 30 mm less, to minimize the distance tire/wheelhouse. I can’t believe that this should be a “bad” solution, what does it mean? R ?
-
Fender rust –> Weld the sheet hole, exchange 2k glass fiber spatula or fender.
Hallihallo, have already informed me in the forum, which possibilities there are for repairing so. First question: Why is never recommended to change the whole fender? Since I have found on the internet for my MAzda 323 already some from: 50€. The repairing with glass fiber spatula or a welded sheet would not be cheaper. If I weld it, or spat, is there the 2nd sheet metal, that one looks rusty also cut away at the photo? Then I would have to have 2 sheets one by one Is there a mistake in my mind?
-
Needed advice from the experienced paintmaker!
I had bought a Fiat 500S 4 months ago, at the back of the trunk handle the paint is scoured, I was of course very enthusiastic about a new car with 5km and then immediately repair, because the car dealer did not take the car back. Now they returned the car to me yesterday and under the paint are like sand grains or bubbles. I immediately made the car dealer aware that there are small bubbles in the paint. e Reply I have to let the paint rest for 8-10 days and the paintr can allegedly grind it away. Can you really grind it on the paint? I’m afraid that I have problems with it later, wanted to keep the car a few years ago is not even a year old. Did he do his job well? I have a few pictures with uploaded of these bubbles/grains are about 30 pieces available. I can’t imagine that this can be something. Please for help
-
Carlift slipped – Delle in the sleeper
… and that’s where it happened. My half-yearly resold timber has broken and the jack has slipped forward, under the threshold. Unfortunately, this has pushed in the threshold :-(. Can you fix it? Would you recommend something to me? Someone similar experience? For a better impression for you I have attached some pictures.
-
How to put Suzuki Swift gears together
Hello, I am about to make a bearing change at mrinrm Swift transmission, old ones are already pressed out and new ones are used. For this directly the first question, is there a built-in dimension, I have used them now so that they are plan with the transmission. If there are installation values, maybe someone has it? Next I want to install the shafts again, however I am not quite sure about the construction of the input shaft. How about the switchboards have to be inserted, with the nose down or up (see pictures) and which functions do they fulfil at all? Next question would be whether the synchronous rings have to be positioned correctly so that the switch stones sit correctly (they also have small savings) or is their installation position no matter as long as they show with the wide flanges direction shift socket, as in picture 2. And I ask already with caution in advance, in order to get the shift head back in later, then some special gear must insert or is there anything else to consider? If someone has a repair manual, a link would be great, I have not found anything anywhere, and no videos on the subject either. Lg René
-
The next insolvency (this time Bielefeld)
http://www.nw-news.de/…/?&%3Bcnt=2752776 The Volkswagen Center has also caught it: http://www.property-magazine.de/…swagenzentrum-bielefeld-16487.html