MOTOR-TALK

Blog

  • Znen Retro Roller – engine does not start despite starting aid spray

    Moin Together, I have continued to try to get my craft scooter to run. In the meantime I have installed a new fuse, emptied tank and used a new spark plug. Finally, I removed the carburetor as well as the exhaust to get the engine only with starting aid spray. Unfortunately, the engine does not want to start. I can also see in the that the spark plug gives a spark when I try to start it, but unfortunately the engine does not want to start. an idea? Another question, if the Killswitch is on off the engine should be on. But with me he also tries to approach on. Is this normal and it just doesn’t work on or how is it normal? Thank you very much, Lukas

  • Threat display error

    Most recently, while reading longer threads, the scroll bar jumps into any position in between. You only see blue. After that, you have to scroll up, then back to the previous positon to read more. This is annoying. The error occurs with IE 6.0 on different computers with different network accesses. So the error is probably not with MT with the hard/software used by me. monegasse

  • Forum Discounts at Kufatec – Why not about Motor Talk??

    Hello Have seen on the Internet that you get 15% discount on certain forums. Can’t the engine talk be offered or someone responsible take care of the discounts granted for motor talk members on Kufatec.de….wouldn’t be a great thing or not? Greeting Ruler

  • Why the hell do I get golf “6” advertising from MT???

    Hello! Why the hell was an email from MT in my mailbox with the title: Golf “6” (actually only a facelift of the 5) coming today??? Why do you now think that everyone wants to read it? Or is now Axel Springer participation with the AutoBlöd, which is behind it? Will one now get such stupid e-mails with every car reappearance??? Thank you, I don’t need that, can also inform myself about new publications if I want to. I expect a position by Mods and the Lord Admin. Greetings to Micah

  • Coolant Kia Cee ́d SW (ED)

    Moin Mein Kia Cee ́d SW Kombi (platform ED) 1.4L Gasoline DOHC 16V EZ082011 seems to lose cooling fluid. I would like to go to the workshop soon. About 4 weeks ago I filled it up with a little water, because it was just under minimum. Today I saw that the balance tank is almost completely empty. Down in the engine compartment it is also a little damp, but I am not sure whether it is oil or cooling liquid or maybe something else. If I now only W Asser refill, the water content would be quite high. So I wanted to mix it with coolant. Unfortunately, neither on the balance tank, nor in the manual, which coolant belongs in -.- Can any of you help me?

  • ESP lamp burns permanently

    Hello all, I bought yesterday a used Kia Ceed SW 1.6 gasoline, 125hp. EZ is 03/2010, KM-Stand 61100. After completion of the purchase and transfer the ESP light (not ESP off!) went on permanently after about 15min. Beautiful shei*e! At the test drive the light was not on. Here is a photo. When I restart the car, the light is off again. This morning it went on again after about 20 min. Is this a known problem if necessary? What would be like a worst-case scenario If there’s something seriously broken, there’s a malfunction in the manual – that can be all… Thank you, many regards Mario

  • Proceed GT 2020 – Fool or exchange red accents

    Hi, I ordered a Proceed GT 2020 in deluxe white. Find the car in itself super nice, but would like to be more classic on the road and to follow the red accents. Especially with side skirts, hub caps of the rims and front lip. I found the hub caps already online, but only in red and that for incredible 110€. Supposedly the side skirts or the front lip should only be red-fooled – you can pull it off or over-fool it so that you can follow the car I want the GT Line look on the GT. Thanks to the creator of the picture at the bottom of the attachment – I found it here in the forum. I can also sell the GT Line look on the GT. Thanks to the creator of the picture at the bottom of the attachment.

  • Seat adjustment Proceed GT / Knee problems

    Hello together, I have been driving a Proceed GT since January and somehow I still haven’t found the right sitting position with which I can sit comfortably permanently. During the test drive and also on the 300km drive home from the dealer I had no problems, but relatively soon after that I developed knee pain (or often even a bit strange feeling in my knee), which only occur when I sit in the car and then disappear quite quickly. This is especially in the rec I am only 35 years old and with my previous cars (3x Ford Mondeo, 1x Ford Escort) I have never had such problems at all and I have never had any knee problems before. I have already looked at all possible instructions for the correct seat position setting and read it but somehow it doesn’t really work for me. If I get the seat so far too far, I can’t really do it. I think that the knee angle fits, I am actually too far away from the steering wheel. Is it possible that the steering wheel can’t be pulled out very far in relation to the pedal position at the Proceed? If I put the backrest upright, I have the feeling that I’m somehow squeezed in (especially with mobile phone and wallet in my pockets). The problem seems to be less pronounced when I change the seat rather high and the seat inclination. Is it possible that it is simply due to the harder suspension compared to my previous vehicles? Does anyone else have/have similar problems and can give any tips on how to proceed? Edit: I am 1,78m tall, leg length up to the step approx. 85cm, arm length forward extended up to the wrist approx. 53cm

  • KIA ProCeed Gt 22 Problems Navi Update

    Good evening, I wanted to ask if someone has the same problem with his process. I wanted to update my navigation system but unfortunately did not. Always error message infotainment update failed to look at dealer. Was then at the dealer he then updated me Navi. And OTA unlocked. Now on 7 December a new update came out and can not update it again. Neither by OTA (will show anything) nor by USB stick there comes back error message. Has maybe someone has an idea what’s going on? As an update I had chosen ceed pe my22 because that coincided with the software code cd.pe…… and cuv it’s not, is it?

  • for the X. times

    hi people, you certainly can’t hear it anymore, or read it, but I have a problem which makes me crazy and maybe I just need some more gunshots… it’s about lima whistles, I’ve read all the last threads, but none of them fits my problem… and that’s what I have the lima whistle on the driver’s side in the tweeter, wiring: o 50mm2 + on the driver’s side, ls cable to the frontsys. also on the b. side. o cinch is originally located on the f ahrerseite o masse, 50mm2 goes to carouse current and cinch does not come together now it is so that whistles are quite quiet and don’t bother me any more, but I drive over cobblestones or similar, I hear a scratch and roar and the whistle becomes louder… then it can happen it scratchs again and the whistle becomes quieter again… another side effect is that when loud whistles start to scratch the ls from the fs and not bring the basses right over, also the ht starts scratching sounds like I’ve put a wobble contact somewhere but the question is where???? I’ve already tried the following: o wired wire behind the radio ordered o new chinch line in air line from radio to amp, also here the same probb. appears…the cinch line is therefore nowhere connected with the current. I also read that you should re-place the radio wiring directly, is that really necessary??? how did you get that? and where could this wackler come from? ? PS: the whistle comes only on the left side thanks already for reading and sry for the many text