Blog

Hello, I have a bmw e60 limousine and have the following problem. If it rains again and again then the water on my paint does not completely drain away. There are lots of water pearls remaining on the whole car. I had once used a polish on it and sometimes in the washing box also a spraywax but the water residue would have to flow off the paint then or? You can now think the car has too many straight and angular surfaces so that water then nic It can flow off properly, but this is also the case on all sides, so not only on the roof and bonnet boot. Even if I drive with it remain up to a certain speed within the place the water remains available. Only in the garage or other covered areas the car starts to dry. Can someone help me? Zb neighboring cars are directly dry even without moving the vehicle. Would be very grateful about helpful experiences.

Hello MT, I have now bought the Sonax Protect & Shine and would like to expand my hand wash equipment to apply the sealing before the winter still cleanly and to make some extensions to the basic equipment. In spring the whole thing is to be extended by a hand polish. The shopping list looks like this so far: – Gyeon Iron, KC RRR or IronX from Carpro, depending on shop availability and price. – Q2M Waterspot – Petzoldts Control Cleaner or Q 2M Prep – at least 4 thin MFTs to remove the prep/controlcleaner like for example Lupus Basic MFT – KC Green Star for the rubber floor mats (here would certainly also the DashAway suffice?!) – Colorlock leather cleaning brush (for the rubber mats) – SONAX 340100 rubberPaper – Grit Guard Washboard – Sonax BSD (detailer) – KC FSE with lime ex (as alternative, maybe the two can be used later also in the household questions:1 Can I use the 3-pack Petzoldts microfibre polisher, Superfluff 3.1 ne Should the GSM fit, right?2 Will 3 pieces be enough to remove from the Sonax NPT?3 I can also take the 3 MFT in the future to remove the detailer after the laundry?4 Clean Knet lubricant set from Petzoldts – I will then use this in the spring before polishing, or does it make sense to do this before sealing? That’s already here.5 Is the order right? Snow Foam rim cleaner HDR Flugro st – HDR Q2M Waterspot – HDR Insect Removal – HDR 2 Bucket Laundry incl. Rim HDR Drying Prep Sealing Sonax P&S NPT Available are: SB Box with XXL foam, warm water for taping and hand washing permission Rim Cleaner Rim Brush EZ Detail Brush Mr Pink Shampoo 2 x 20L Bucket with Grit Guard and Lid 2 x Lupus Premium Glove for top 1 x Lupus Basic Glove for bottom 1 x Handpolierschwamm soft 3 x Lupus Applicator Pad Disc Cleaner by KC and Frosch 3 Waffle MFT Lupus 1 x Dash Away 3 x Lupus AllPurpose 40×40 1 x CW1:100 Insects Remover 3 x Lupus 380 60×40 MFT 3 x Lupus 530 60×40 MFT 3 x Petzoldts 3.1 MFT 1 x CleansingKnete Lubricant Set Petzoldts Do you have suggestions for improvements and answers to the 5 questions above?

Good evening to the municipality in the Ruhr area. As a friend of the car care not carried out itself, it is now time to visit a vehicle conditioner besides the more or less regular visits of the wash road, which can offer the whole program professionally as possible. By this I mean –> paint treatment, sealing, treatment of everyday scratchers and stone strokes, if necessary smart repair –> interior treatment inclusive leather care, especially treatment of Led It would be nice if you could give me your positive and also negative references / experiences so that my deep-sea blue will be treated well. The following areas are eligible: Essen, Bochum, Dortmund, Kreis Recklinghausen. Oh so, to the demarcation it should be clearly said that I am not just looking for addresses. Thank you in advance, here the recommended mention of the framework conditions: To the vehicle, it is an Audi A5 coupé in deep-sea blue metallic, built in mid 2008, “my r” since 08/2012. The car is used year-round about 15,000 km per year, working day on approx. 50 km highway. Accordingly the bonnet etc. looks like, washing system strips, front insects burned in, superficial “wipe” crackers on a fender, stone blows Washed every 3-6 weeks at Mr Wash, if necessary also the internal cleaning, last polish before handing over by the dealer, since I did not have anything more done. After processing I want to continue so v good shine with extremely long protection, scratches / stone strokes repaired and conserved, leather wears repaired.

Sali together, I’m a complete lender in things polish, so I wanted to ask here for information. I bought a bussle, 13 years old, which has a print/letter from the pre-work on it…… The previous owner then put this print away but only sporadically. My question, how do I get this polished properly? What are suitable products? Can I get this without a polishing machine? And what do I do with the one where the paint is already gone or one basically the white under even a simpler question: How can I get the whole artoff in the AuSen area again full black? Thank you for an answer Greetings Beni