Blog

  • Milling flipkeys?!?

    hi, got me a ffb with clapp key at ebay, and now I’m looking for a forgiven key service that can mill me the blank! was today at “mister minit” who said that go net. in vw car house I was still net, so I’m not sure if they can. would be good if I could give a tip! mfg patrick

  • climate read

    Hello! Can someone tell me how the instruction is on the air conditioner read out. Greetings, Michael

  • Smart SIXT —> long highway ride?

    Hello together! and that’s what I asked you 😉 because leverkusen is in the cup finale*happy* I and my buddy bought tickets for the finale in berlin! now we thought about how best we come to berlin from Friedrichshafen (for all those who don’t know where this is on Lake Constance in the very south). despite the eigtl relatively high costs we have to rent 100 (100 euro rent with insurance protection, + sprit) for it to fire a car at sixt. and there is also the smar t fourtwo. now to my questions: 1. can you drive almost 700 km by car or is there a motor sample or something like that? 2. what is the consumption ? these are eigtl almost continuously by car, from fn only to lindau and from there only by car to berlin 3. does someone already have experiences with long car rides with nem smart? any unusual things sitting problems or something? would be really nice if you can help us!

  • Is there a chance of remission?

    I had a fire case with my vehicle a few months ago. Has everything been correctly refunded and replaced so far. There was also damage to the building. Today I get the following letter from the insurance company of the homeowner (fire-building insurance). Dear Mr. XXXX We are currently checking our regress options. According to the information provided by us, the fire damage has been caused by your vehicle. Please let us know the registration number of your car as well as the car liability Westphalian Provinial Versicherung AG (Westfälische Provinial Versicherung AG) What the hell does that mean?

  • Opel Adam ignition coil defective

    Hello, maybe someone knows the problem? 2015 shortly after the warranty for my Adam from 2013 broke the ignition coil. It jerked and he didn’t pull anymore. I changed it back then and continued to maintain my car and did all inspections. Now it has already been diagnosed today that the ignition coil is broken. I fall away from the faith. Kulanz application was rejected directly. Magnificent … Warranty of the ignition coil is already around again. Complaining at the custodial office… let’s see what comes out…

  • Strange formatting / paragraphs?

    Moin, look at this post. I have written a continuous line, a word marked in bold. Two paragraphs have become out of it. How come?

  • Fuel High Pressure Pump Peugeut Boxer 2.2 HDi Error P0093

    Good day, the following problem: Motor Starts after a long organ he can hardly hold the speed, the tank indicator is at 0 while the vehicle runs and after a short time the vehicle strangles. It feels as if at the beginning enough fuel pressure still comes on the injection nozzles but falls down quite quickly and it is not enough for the engine and then runs out. So much for my 3 estimation. Error memory says from P0093 thus large leak in the fuel system. a -So far I have cleaned the fuel filter – Changed the fuel pressure regulator on the rail – Changed the fuel pressure sensor on the rail – Changed the pressure control valve on the high pressure pump – Changed the injection nozzles all but not yet Programmiert since you need a constant running of the engine which is currently not the case. My last guess would be that now the high pressure pump does not build enough pressure. how should I proceed or in the best case a high pressure pump for exchange might be lying around? I would be too thankful for you the vehicle is now unfortunately already there half a year and I just can’t get any further. Thank you in advance.

  • Peugeot J5 2.Gang scratches / Kracht very strong when switching

    Dear community, I hope someone can help me, I’ve been looking for a solution for weeks; while switching from the 1st to the 2nd gear, it’s now crawling at the scraper, as if the clutch hadn’t stepped on. That came up a while ago, but then it was gone again. Now it’s all the time. It comes up as soon as you have a bit faster than step speed and want to move from the 1 to the 2nd. Not underneath. Also not with running engine and then insert the 2nd gear. with the other gears. Also a switch down into the 2nd is not possible, the crash is extreme. Only possible if it really rolls almost only, or. estimated 10km/h “drives” Some say it is the clutch, which I almost want to exclude, because the other gears work. Gear oil I have also replaced, even 2x to get out for safety. Generally it switches more easily afterwards, however, except the 2nd gear. Then they told me it is the synchronous rings of the 2.Gang. And with intermediate gas it should be gone, but it is not. Does anyone have an idea ? many greetings, maze

  • Which wheels can I drive?

    Moin Moin, I have an Opel Adam from 2016 that currently stands on 185/65 R15 88T wheels. May I also ride a wheel with the following values with this registered value: Wheel: 205/45 R17 88W XL Wheel: 7×17 ET38 4×100 63 should the new wheels be removed from the TÜV?

  • AdAM body variants

    What do you think, or would you still wish for in the style/sense of the previous 3-door… – a 4-doorhttp://www.blogcdn.com/…/opel-adam-4-door-2.jpg – a convertible, “right”/rolling roofhttp://www.motor-talk.de/…/adam-cabrio-2-i205258189.html – a mini SUV (a la Daihatsu Terios, 3.84 m !)http://en.wikipedia.org/w/index.php?… – ….?!