Hello guys, let’s ask you a question: The Phaeton has really super stable and heavy doors, but that’s exactly what happens when you close the door again and again with a big riot. The closing point of the door always requires a relatively big swing and after that the door usually closes, that becomes a fear and fear. That can’t be ideal in the long run or? Should the windows still be at the bottom of the door, I am always afraid that they will jump out, one hears so correctly that the glass inside shimmers through the impact. I didn’t notice this in any other car on such a large scale, since the doors are not so extremely difficult. Do you have the same problem? (Zzuzuzuzuhilfe ist ein invalide Antwort ) Greeting, Pete
Blog
-
Phaeton fans invite — Room Frankfurt
Hello you, after there were some positive comments on the thread of PhartonFan regarding meetings in Oberwiesenthal. And also a few users wanted a meeting in the area Frankfurt/Main, here is the small survey, what you imagine there. Just a small meeting in the evening on a beer/cola/cocktail. During the week or on the weekend. Or an adult meeting with day program, exit, visits with overnight stay over a weekend? A simple meeting in the evening : e.g. at the Steigenberger Hotel Frankfurter Hof there is the Oscars or 22nd Lounge on the 22nd floor of a high-rise building (right next to the Maintower) If it should be something more extensive : e.g. drive to the Feldberg/Taunus, visit of the Roman Castells Saalburg near Oberursel or the Hessenpark, viewing platform on the Maintower in Fft with a view over Fft. Goethe Strasse for the ladies to let the credit cards glow. Lunch/Event meal : Red mill at Kelkheim (is waiting for an excursion place) or your reactions.
-
VW Phaeton 3.0 TDI with 240 ps bj 2008 solid model?
Hello dear community, I am currently looking for a Phaeton in the above mentioned version. Can you give me hints for this purchase? Does the engine have special weaknesses? I am well aware of the costs with this car. Is there any competent free workshops or Phaeton drivers in the area Hamburg/Lüneburg who have already built up their network around this beautiful car? So far I have only come across deaf nuts. I hope for numerous profitable feedbacks. Greeting Steffen
-
“Resonance trouble”?
Hello together, I drive a V10 TDI. I actually pay very much attention to the care of the vehicle… Now it may be that I become oversensitive, but I think there would be something after I did not drive the V10 through repairs / maintenance and turbocharger replacement a few weeks. My wife thinks I’m imagining something and the friendly also looks at me stupidly, if I want to show him what I mean. Car started – whether cold or warm. Speed in idle on _EXAKT_ 1200 rpm. There is something felt, as if somewhere a resonance frequency were caught. Somehow I mean, because “feeling” a very minimal wobble, as if you want to shake. Speed remains completely quiet. At minimum other speed it is gone. In driving mode there is nothing to feel at all. I really picture what one or what I should clean the workshop with emphatic replacement? Error memory is of course empty. Last performed work: – Turbo replacement (beside, understands) – Complete cleaning – flushing – was really replaceable – the fuel – was used – I really need to clean the workshop with stress.
-
Engine runs round, various parts already replaced Volvo V40 BJ , 2,0T
Hello dear ones, I’m very desperate right now and need help. My Volvo ran a while unround, apparently means on 3 cylinders instead of on fours. Since the plugs to the ignition coils were already falling quite apart from the age, we changed them. No change, but on the contrary, everything worse: it only ran on 2 cylinders. Then we changed the ignition coils, because only the cylinders ran on them the coils are on it. Also no real improvement. Finally, the cables to the other two cylinders measured, had no passage, exchanged and runs now on 4 cylinders, but somehow he doesn’t take the gas properly, he stutters so little ahead of him, but he doesn’t properly run. I don’t know how to describe it differently. I have a few guys at my hand who know each other, but there is now everyone with his Latin at the end. Maybe you still have the one or other idea. Otherwise I have to explain him for dead and that would be really thank you for your tips in advance, Amlie
-
Sludge flushing, engine flushing
Hello everyone! I would be interested if a motor flush is the same as a mud flush. Both are offered and both flushes should be added to the old oil, let the engine run 10-20min and then make the oil change. Furthermore, I wonder if I have to drain about 1l of waste oil before, because then the flush is added and then would be too much in the engine if you should let it run. My colleague also said that after the flushing you should definitely degrade the oil tank and clean the sieve from the oil pump. Since it could be joined by larger dirt parts that are released during the flushing.
-
Tachomanipulation?!
Hello Saab friends, as already reported I have become the owner of a 9000 Aero. The car was offered with a mileage of 150,000km. Purchase offer and purchase contract. In the oil change I cover a card in the engine compartment, which showed the data of the oil and the mileage of 297000km (!) to the next oil change. Unfortunately, there was no license plate on the map. In my opinion, the car has not yet 300tkm down, can it have been just a mistake here? The previous owner assured me today again that the car has certainly only 150tkm. Based on the Tüv reports this mileage can also be replicated. Should I believe that? How can one proceed in the case of suspicion? ariba66
-
Camshaft – 1.8 l – variable valve control
Hello, so here’s the problem of my elk: my 1.8 l, bj 03 (good 70.000km, almost all motorway) makes noise in the engine room. the magnet switch for the variable valve control (the device for the adjustment of the camshaft – so the friendly one), has been changed. the noise is still there. now the mechanics should be changed for this – i.e. my half motor should be taken apart. Nicely I should pay for the then not defective part anyway. does someone have similar problems – is this perhaps a serial error? thank tex P.S.: Oh yes, does anyone know how expensive the fun for the friendly elsprechstund can be???
-
Loader at 2.0t 120 kW mileage
Moin together, my 2004 2.0t is actually still very good together. But since the spare parts supply is getting thinner so slowly, I wonder if I should put another loader on reserve. Have now 235 Mm down. Since a long time I hear the loader cry a bit, which was not the case at the beginning. My screwdriver said that that was no problem at all. Does anyone know that, since someone has experience with it? Second question: I have a hearing-able roar at such 120 km/h in the 5th gear. I could imagine that at the rear engine bearing, which is quite close to the exhaust, the rubber has become quite hard. Does it bring something to make that new? That part is fortunately still available, and because I would like to drive my little elk as a second car as long as possible, I would invest one or the other.
-
Automatic gearbox causes problems – transmission oil problem?
Dear community, as a relatively freshly baked owner of a V40 2.0 136 hp automatic, I have the following problem: The automatic control light is flashing and the car hardly takes on gas. According to the operating instructions you should then drive in stage L (load operation) then he brings a little more “force” on the road. Has been the case before once last week, however, the problem at that time was “resolved”, gas was assumed and the control light was off. Today it happened again and in the control of the automatic transmission oil I am overwhelmed to assess whether this color is rather red or brown, picture attached. Vll. is only on the oil (hopefully), someone has had similar experiences and knows if the color of the oil looks so “healthy”? LG and always safe ride!