Hallihallo, yesterday the blow hit me when I saw that the private winter service of my neighbour allowed the martens to not slip out…^^http://up.picr.de/20844600gb.jpghttp://up.picr.de/20844601sq.jpg (the pictures are also in the appendix) öhm..nun I carefully removed the stones with water and noticed that there is a small crack in the rear window. The crack is not yet open..only clearly visible. I’m not really sure if it comes from it or was created days ago, since I don’t always clean the rear window so thoroughly or so…. Could that be with a 17-year-old plastic disc that so stones get the plastic broken? Would I be right if the insurance of the winter service had to pay the heck disk exchange. What do you think?
Blog
-
Part numbers Door entry lights searched
Hello, I’m looking for the right part no. for the two door entry lights at the bottom of the door panel for a W910. Interesting would also be the part no. for the corresponding cable set. Can someone help me or give me a tip – except to go to the friendly one? Would my camper like to retrofit with it.
-
Smart makes funny noises
Hello, I hope you can help me a little bit. For about a year now I have a Smart 450 of the first series. The previous owner has let the car get quite lost and almost not cared for at all. Now the TÜV is standing at my Smart and I have to ask a few small questions before, e.g. where do you get your spare parts? But it is much more important to me if one of you might know this problem. And I know that the exhaust is completely over and therefore it is very loud. However, the car squeaks when I give gas. I have also made a video that you can watch. At the beginning of the video I have given a few times gas there is not so extreme. In the back part of the video this is then again during the ride, then you hear the noises very clearly. I have now already changed the wedge belt (light machine & climate) maybe I just didn’t tense the belts enough?
-
eBay coupler rod vs originals from FOH
Hello people… …now it’s also time for my mom. It’s time to change the coupling rods. So I asked the FOH today about the price. One costs about 45 euros. Now I’ve looked around for fun at 321. And look, clearly cheaper!!!! 2 pieces for 14,40 € !!! See here I want to know from you whether someone has installed these eBay parts and whether they get qualitatively to the Opel dealer. I’m a bit skeptical about that. After all, I don’t have a chance that the things have to be replaced after 5tkm or so because it’s inferior material. It’s called who buys cheap, he buys twice. I hope for a few reviews. Nice thanks in advance… LG Michael
-
Information about the current CRC with 2.2 l diesel motorization
Good day, I am the Thomas, I am 42 years old and I’m actually quite new here (second post :-)) Professionally I am a technician and work independently for the automotive supply industry My leisure time I like to design with my wife and enjoy life in the country where we also live I want to add possibly Honda CRV 5 doorr. Therefore find information of all kinds about the vehicle and Honda Please also write negative, or. what an unpleasant thing has occurred. Are Japanese manufacturers really as reliable as you always hear it? Can you imagine, but it seems to be true. In my circle of acquaintance there are few drivers of Japanese vehicles, but some drive Toyota and one drive also the Honda CRV However, my circle of acquaintance with drivers of Japanese vehicles is rather small and therefore not necessarily so representative. Therefore, I would like to get wide opinions, experiences to this vehicle and also collect Honda. I would like to get busy in the Feb. to put a new vehicle and therefore also need this information. On 05.01.2009 I get such a Toyota LC 3,0D for 3 days is a big representative of our dealer.
-
Smart 450 immobilizer
Hello guys, I have a problem with my smart. I had two keys, one of which, when the opener was activated, made the warning flashing system blink nine times and the other one didn’t do anything. However, with the one who did nothing, I could unlock the immobilizer and start the car. With the other I could only open the sliding roof. Suddenly I could not unlock the immobilizer with either of the keys anymore. One key remained in such a way that when the opener was activated, one caused a nine-time blinking and with the other key only comes this nine-time blinking when I want to close. I have now connected the car to the star diagnosis and wanted to learn the key, if I have understood everything correctly, then the star diagnosis does not establish a connection to the control unit or the vehicle? I then called a friend who has a VCDS and also he could not establish a connection. I can not program the keys and I can not get the drive away, can someone help me? Thank you in advance.
-
Engine goes off and starts again after 10min
Hello, the engine goes off and off from my Smart – now it is once a week. Trying to restart the Smart does not succeed immediately, but only after 10 minutes. Until then every attempt fails. The starter tries to start the engine, but does not start as if there was no fuel in the tank. However, every time I can start the car after about 10 minutes. No error could be read in the Smartfachwerkstatt. The master also added to it only: “The problem we had not yet – no idea!”. Does anyone know this problem? I have already tried to find out about the search function, but you get about 3,500 hits in the search “Motor goes off”. Thanks for your help.
-
Strong hum/vibration Smart 451
That’s why I can’t get into the middle of the day. I’m really going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’m going to get in the middle of it. I’s going to get in the middle of it. I’s going to get in the middle of it. I’s going to get in the middle of it.
-
Wheel screws on the Sprinter do not dissolve. How to solve?
Hi, I tried to switch from winter to summer bikes the day before yesterday. On the rear axle it went well, but on the front left the air impact screwdriver does not release two screws. I built something up (see picture). I wanted to put a 2m long tube on the cross. I tried a little but then stopped out of fear. What do you mean? Try that with the extension or in the workshop hoping that they have a stronger impact screwdriver? Maybe there is another trick? The wheels were changed the last time in October and tightened according to manual with 240Nm.
-
Spare part availability Vario
Servus, a year ago I bought a Renault Master 2 year of manufacture 2004, now I’m driving my truck driver’s license and would like to get into the 7.5 tons class and therefore sell the master. Another reason why I have to sell the master is because I can’t find any more engine bearings for it. I’m very sure that I won’t find them anymore, after I’ve felt through the entire supply chain all the car brands that have ever had something to do with Renault and have called off all sorts of inside/except European sellers. Now I’ve looked around a bit and the Mercedes Vario has fallen right into my eye. Actually, it’s exactly what I’m looking for, about the consumption of the size it’s perfect. Also, it’s much more known and popular than the master(zb in the camper scene). My question now would be which year of construction (series) I should avoid, so that something like the master doesn’t happen again. Because online you find many Varios with Bj 2004… Also, you say the truck engines twice as far as car engines, so that is the whole of the 100,000 km for a passenger car Vario?