MOTOR-TALK

Blog

  • Which 16er all-round front system?

    Hey sorry, if the topic was already (too) often dealt with, but the search unfortunately doesn’t lie. And indeed a 16er system has to be in the doors! Today I was short at the ACR to see what they have there or what they would recommend to me up to 200,-: The guy was absolutely thrilled by the Rodek RC162RP (170,-), especially because of the tweeter…should sound very musical. When I brought the Focal 165V2 into play, it didn’t hold so much of it…..extorted, overpriced, Focal is not anymore The tweeter should not be the bringer either. What do you think about it? Do you have alternatives? You can hear a lot of good from Rainbow. Or Exact, GZ, Hifonics? Do you suggest something, am absolutely undecided As I said before: price up to 200,- and all-round qualities. Radio is an Alpine 9812 and as a power stage should again a bridge 75.4 or 105.4 pure. In my old Audi I had the combination of Alpine 9812, Bridge 75.4 and Focal 165V2 in it and was eige But if you can get better for the same money… ..why not?

  • Connect 3 speakers, but how??

    I want to connect 3 speakers per door, BUT I have to let them run over one channel, so far so good. There are 2x 3-way boxes ( 165mm ) and 1 x 1-kickbass. ( 130mm ) So now the question how do I do it to make it work best. The problem is that the two 165mm speakers have 4Ohm and the kickbass has 8Ohm. Furthermore, they all have a different nominal and maximum load. 1x 3-way LS 165mm with 4Ohm and 260 watts peak (unrealistic value, but what other 1x 3-way LS 165mm with 4 ohms (no watt input) 1x Kickbass 130mm with 8 ohms and 60 watts (no matter if sinus, RMS or maximum ??) so you see my little problem, I want to connect all LS gladly, but don’t know as well as, in row ?? will certainly not get out at 16 ohms. All three parallel ?? would then have to be about 1.6 ohms ( final stage no idea if that is going along, it runs stable on 2 ohms, but for 1 ohm it is not designed, so k.a. if 1.6 in it si nd. Or should I just clamp a 0,4 ohm resistor so that I have 2 ohms ?? Or should I switch everything in parallel and clamp a resistor in addition to the weaker LS so that they don’t get that much ?? If yes, can one tell me how much ohm I have to take so that I can keep a certain wattage from the LS?? Or group ?? the kickbass with an LS in parallel and then the other LS in row ?? Should then be about 7 ohm. I want logically I’m afraid that all LS will get rid of it, but I’m afraid (since all have different performances ) that I’ll have a mix then, so that an LS is already at the limit and that maybe doesn’t even use its rms performance. And that’s where I’m not getting any further in the planning right now. So help!! Well, I’d let myself be beaten wide to give up one of the 3-way LS, but I want 1 LS and the Kickbass in any case and as I said, only 1 channel left for that. So that I can get rid of all LS, but I don’t want to have 1 LS and the Kickbass in it and as I said, only 1 channel left for that. hope some of you have some suggestions. Thank you Michael

  • Best Mono-Amps for the Boot

    Search: Amplifier for the subwoofer. Will: over 400W at 4 Ohm, over 800W at 2 Ohm… possible 1 Ohmstabilität… Price: No real idea. It should somehow lie between 200 and 600 Euro. What should not be: US-Amp, cogeneration plants that need without end power without implementation… So I’ve been looking for a while, and somehow hang around the digital monoblock. After I’ve seen and heard the Carpower Wanted 800-D times, I’m not sure if I really want to. On the other hand, The 800-D is not the best thing to get money for the batch. I have now looked for the impulses. The SD-1200 seems optimal, but you don’t necessarily get new, always only the SD-1500. ESX Vision is also nice, but is a bad damping factor what to expose to the impulses? Can other stages in the price range this much better? Jo, in principle this is the thing. What do you think about it? am I on the wooden way? you really get more than 1000Watt from the SD-1200 at 2 ohms? Does the digital level bring the same “powers” as an 800-watt analog level?

  • Gas bottles filling in France

    Hello together, I plan to move my holiday trip to France at short notice and wonder how I can fill my two aluminium gas bottles there. This topic was last dealt with in 2013. But maybe there are innovations? We travel from place to place through all of France for 4 weeks and are not fixed on a campsite. I would like to have a list where I can have my aluminium bottles filled. Such a list exists for the Scandinavian countries. r France? Do I really need an adapter or is it available at the filling station like in Norway? Because we like to stand free electricity is only an emergency solution. We definitely take a small electricity heater with us for all cases.

  • Don’t get it by calculating housing!!

    Have found a good (German) program for calculating housings: Bass-Cad Now I’ve played around a bit, but it’s all a mystery to me! If I enter the recommendation of Ground Zero, there’s the drawing: -3 dB at 34Hz and max 8dB at 52Hz?? Does this mean that the lowest frequency is now 34Hz …. If I play a bit I also get to -3dB at 18Hz and max 0dB at 51Hz What should I do? Which values should come out of this? Is this ever a good (German) program for calculating housings: -3dB at 18Hz and max 0dB at 51Hz What should I do? depending on my possible space/volume in the car? Maybe someone can help me! Have a box in the car below, which, however, is so big with 250L that I can not get my back seats in more. But would like to have it back again!

  • Pictures of my plant 🙂

    Hi So I finally got a couple of photos to take. It’s not quite finished yet, there will come a plate with fabric that you can only see the two end stages cut-outs. In the right side part my changer sat in until a few days ago. The radio front is perhaps a matter of taste but I find it just awesome also from the design it likes. The subwoofer box is own, as well as everything else in the trunk also *g*. The left end stage is the 2channel and the right the 4channel. Have fun watching. Could tell me how you like it. Greet Linos Pictures:http://web126.server8.rhs-it.de/case space%20003.jpghttp://web126.server8.rhs-it.de/case space%20002.jpghttp://web126.server8.rhs-it.de/case space%20001.jpghttp://web126.server8.rhs-it.de/front%20001.jpghttp://web126.server8.rhs-it.de/end stage%20001.jpghttp://web126.server8.rhs-it.de/end stage%20001.jpghttp://web126.server8.rhs-it.de/end stage2%20001.jpghttp://web126.server8.rhs-it.de/DEH-P77MP%20001.jpghttp://web126.rhs-it.d. e/High toner%20001.jpg

  • Jl 10w0- 3 pieces – 4 ohm ?

    hi saw this at ebay:http://cgi.ebay.de/ws/eBayISAPI.dll?… and ask me now how he comes with 3 jl 10w0 to 4 ohm when he switches them parallel or in row? (see picture and text) after all he has only 1 cable to the end stage, so are all connected. can one explain to me ? I definitely don’t come to 4 ohm, no matter how I turn it and turn it. thank you 😉

  • !!!!! HELFT DiDan !!!!!!

    Hello people! Now you are asked! One of our good old friends and hobby comrades, known under the account DiDan, was banished from the forum. The reason seems to be personal revenge of a certain moderator! Here we want to vote democratically now! That’s why I call !!! ALL !!! Forum members to vote: Who is in favor of DiDan being taken back here? And of course also: Who is not? I know, it’s a lot demanded of you, but this is like So take part in it. Everyone can make his or her opinion public without being held accountable for it now or at some point! So let’s go!

  • Truma S3002 goes out on a high level after a few minutes

    Hello, this summer is rather grown through and a little cooler which is why I started my Truma S 3002 in the morning on vacation. Unfortunately, after a few minutes it always goes out when it is set at level 4-5 or higher. If it is set very small, it runs through but at 5 degrees it is a little bit to get temperatures in the caravan. When it then runs out, it tries to re-ignite. Then it is turned off and waits 10-15 minutes until I get it back mme. Before I make the days an appointment at the workshop, maybe someone has an idea what it might be about. Thank you!

  • Whereofaway,again

    Hi So slow enough for me, I have now within half a year 2 Woofer to melt, although I don’t even hear so loudly, ok the low frequencies are already clear that they are not so good, but that can’t give after all if you hear from time to time to such songs that the Woofer is over At first it has caught Emphaser Xtrem T2 (real horny part!!) and 2 months ago the cheap Spectron Now the question is which Woofer should I get now, what is important to me, d as he can also play depth frequencies without giving up the mind immediately,and so to speak is an all-rounder (metal, techno, rap) What recommendations are there on your side? Should cost a maximum of 300 € and be available in the ACR or media market thank you in advance (if someone is so nice to write, so now is enough gschlimt)